The PN9108 Power over the NET™ is a control unit that provides remote power management for eight AC outlets via a TCP/IP connection, allowing administrators to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world.The PN9108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.

Features:

	Remote power on / off / reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet port
	Local power on / off / reboot control via the PN9108’s RS-232 port to the computer’s RS-232 port
	Daisy chain up to 15 additional stations to control up to 128 outlets
	Manual switching between Local and Remote access for each port via front panel push button switches
	Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
	Easy setup and operation via a browser interface
	Provides three configuration/management methods: Browser; Telnet; or Console Terminal
	Safe shutdown and rebooting for Windows systems*
	Overcurrent protection and recovery for each AC port (110 V model only) plus total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface on their browsers
	Separate circuits for the unit’s power and the power to the devices – the power control status menu is still accessible even when an overload condition trips the devices’ circuit breaker
	Cumulative load measurement - remote users can view load information in amperes via the GUI on their browsers
	On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
	Port grouping - perform the same action on a specified group of ports
	Current Display for easy current status monitoring
	Out of Band (OOB) operation via terminal or dialup connection
	Two level (Administrator and User) security
	Detachable front panel for convenient rack mounting
	UL/TUV approved
	Multiplatform support: Windows 2000/XP/Vista, Linux, Unix and FreeBSD.
	Network Interfaces: TCP/IP, PPP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, ARP, NTP, DNS, Telnet, 10Base-T/100Base-TX, auto sense, Ping *Safe shutdown and rebooting is supported if the Power Monitor utility has been installed
	For more information about KVMs which can connect to PN9108, see Compatible KVM Table

Package Contents:

	1x 8-Port Power Over the NET™
	1x AC Source Power Cord
	8x Power Outlet Power Cords
	8x Safe Shutdown Cables
	1x PON Cable (DB9 F to DB9 M)
	1x Rack Mount Kit (Brackets and Phillips head hex M3 x 8 screws)
	4x Foot Pads
	1x Software CD
	1x User Manual
	1x Quick start guide

Function		PN9108A	PN9108G
Power Characteristics		100–240 VAC; 15A*	100–240 VAC; 10A**
Power Inlet		1 x IEC 60320/C14 Male
Power Outlets		8 x IEC 60320/C13 Female
Connectors	PON In	1 x DB-9 Female (Black)
	PON Out	1 x DB-9 Male (Black)
	Safe Shutdown	8 x 6-pin Safe Shutdown Jacks Female (Black)
	LAN	1 x RJ-45 Female (Black)
	RS-232	1 x DB-9 Male (Black)
Switches	Reset	1 x Semi-Recessed Pushbutton
	Power	1 x Rocker
	Station ID Display	1 x Pushbutton
	Outlet On/Off	8 x Pushbutton
	Remote On/Off
LEDs	Outlet Power	8 (Orange)
	Remote Access	8 (Green)
	Link	1 (Green)
	10/100 Mpbs	1 (Orange/Green)
	Power	1 (Blue)
	Current	1 (Red)
	Station ID	2 x 7 segment (Orange)
I/P Rating (Total input)		100–120 V AC; 50/60Hz; 12A	220–240 V AC; 50/60Hz; 10A
O/P Rating	Per Port	100–120 V AC; 50/60Hz; 9A	220–240 V AC; 50/60Hz; 9A
	Total	100–120 V AC; 50/60Hz; 11A	220–240 V AC; 50/60Hz; 9A
Power Consumption	No Load	120V; 60Hz; 16W	230V; 50Hz; 16W
	Max Load	120V; 60Hz; 1440W	230V; 50Hz; 2300W
Environment	Operating Temp.	0 ~ 40˚C
	Storage Temp.	-20 ~ 60˚C
	Humidity	0 ~ 80% RH ,Non-condensing
Physical Properties	Housing	Metal
	Weight	4.20 kg
	Dimensions ( L x W x H )	43.72 x 25.40 x 4.40 cm