|
Network Protocols and Features PPPoE, DHCP client and fixed IP connection to ISP NAT, static routing and RIP-1/2 Universal Plug and Play (UPnP) Compliant Dynamic Domain Name System (DDNS) Virtual Server and DMZ SNTP, DNS relay and IGMP proxy POP3 (email account checking) IGMP Snooping for video service
Firewall Built-in NAT firewall Stateful Packet Inspection (SPI) Prevents DoS attacks including IP Spoofing, Land Attack, Smurf Attack, Ping of Death, TCP SYN Flooding, etc. Packet Filtering port, source IP address, destination IP address, MAC address URL Content Filtering string or domain name detection in URL strings

VoIP Two RJ-11 FXS ports for connecting to regular telephones One RJ-11 FXO port for PSTN Fixed-line Compliant with SIP standard (RFC3261) Supports G.711 A/μ law, and G.729 Audio Codec standards Supports Telephony Features: call waiting, silence suppression, voice activity detection (VAD), comfort noise generation (CNG), G.168 echo cancellation, and caller ID (Bell 202,V23) Voice over data, QoS control to ensure higher voice quality Automatic fallback to PSTN Fixed-line when power outages occur or VoIP service is not available. VoIP gateway features offer Least Cost Routing support
Quality of Service Control Supports the DiffServ approach Traffic prioritization and bandwidth management based-on IP protocol, port number and address
IPTV Application* IGMP Snooping Virtual LAN (VLAN)
Wireless 802.11g (BiPAC 6404VGP) Compliant with IEEE 802.11g and 802.11b standards 2.4 GHz 2.484G Hz frequency range Up to 54 Mbps wireless operation rate 64/128 bits WEP supported for encryption Wireless security with WPA-PSK/WPA2-PSK support WDS repeater function support
Management Quick Installation Wizard Web-based GUI for remote and local management Firmware upgrade and configuration data upload and download via Web-based GUI Embedded Telnet server for remote and local management Available Syslog monitoring SNMP v3, MIB-I and MIB-II support Supports DHCP server/client/relay
Hardware Specification Physical Interface WLAN: Antenna (BiPAC 6404VGP) WAN: RJ-45 Ethernet port for connecting to ADSL/Cable device Telephone: 2-port FXS 1-port FXO (For PSTN Fixed-line support) LAN: 3-port 10/100M auto-crossover (MDI/MDI-X) Switch Console: Ethernet Port # 3 can also be connected to console Factory default reset button Power jack Power switch Physical Specification Dimensions: 8.27" x 5.83" x 1.42" (210mm x 148mm x 36mm) Power Requirement Input: 12VDC, 1.2A
Operating Environment Operating temperature: 0 ~ 40 °C Storage temperature: -20 ~ 70 °C Operating Humidity: 20% ~ 95% non-condensing |