| The Wacom DTI-520 Education Model combines the XGA 15" TFT LCD Monitor with a Wacom tablet. It can easily be connected to a projector for an enlarged screen to facilitate visual communication between the teacher and students in a digital classroom!
Flush LCD cover surface lets your hands and ideas flow easily and the acrylic material is safe for the students.
| LCD Display |
| Display Panel |
15" a-Si Active Matrix TFT LCD |
 |
| Number of Pixels |
1024*768(XGA) |
|
| Input Video Signal |
Analog RGB: 0.7 Vp-p positive at 75 ohm
H/V Separate sync, TTL Level, Positive/Negative
H/V Composite sync, TTL Level, Positive/Negative |
|
| Recommend Resolution |
1024 x 768, 800 x 600, 640 x 480 |
|
| Luminance Uniformity |
80% |
|
| Synchronization Range |
Horizontal: 30 - 57 kHz, Vertical: 45 - 75 Hz |
|
| Timing Modes |
10 preset modes + 18 user modes |
|
| Auto Adjustment |
Less than 2 seconds |
|
| Display Area |
304.1 x 228.1 mm |
|
| Pixel Pitch |
0.297 (H) x 0.297 (V) mm |
|
| Viewing Angles @ CR10:1 |
140 /120 (horizontal / vertical) |
|
| Colour Depth |
16.2M colours (18 bit + FRC) |
|
Contrast Ratio
|
500 : 1 |
|
| Luminance |
250 cd/m2 |
|
| Display Response Time (Tr + Tf) |
16 ms |
|
| OSD Manual Control |
Brightness, Contrast, Pitch, Phase, Vertical Position, Horizontal Position, Language, Back Light, Menu Position, Reset, Colour Temperature (9300K / 6500K / 5000K / User / Direct) |
|
| Display Plug and Play |
DDC2B, EDID1.3 |
| Tablet & Pen |
| Reading Technology |
Electro-magnetic resonance technology |
|
| Tablet Active Area |
304.1 x 228.1 mm |
|
| Tablet Resolution |
0.05 mm/point (508 lpi) |
|
| Coordinate Accuracy |
± 0.5 mm |
|
| Tablet Reading Height |
5 mm from cover plate |
|
| Accuracy Assurance Height |
0 mm from cover plate |
|
| Report Rate (Max) |
100 points/sec |
|
| Maximum Pen Tilt Range |
Maximum coordination detectable pen tilt range 40 degrees from vertical *** |
|
| Pen & Eraser Pressure Sensitivity |
512 levels |
|
| Interface |
USB, Analog RGB-in, Analog RGB-out, Composite Video-in |
|
| Pen (with Eraser**) |
Pressure sensitive ID Pen * |
|
|
* Pen ID function is application dependent. To apply this function, a special application needs to be developed by a local software vendor. In this case, an API (Application Program Interface) is available directly from Wacom. Please contact your local representative if required.
**Pen pressure may not be fully functional with Adobe Photoshop CS & CS2. A new driver is now available to correct this issue. For further technical support inquiries, please go here.
*** This specification means if the pen is held at an angle larger than 40 degrees from vertical, the correct detection of pen coordination can't be assured. This specification doesn't mean the pen tilt can be detected, measured and utilized in application program.
|
LCD Display |
|
Display Panel |
15" a-Si Active Matrix TFT LCD |
|
|
|
Number of Pixels |
1024*768(XGA) |
|
|
|
Input Video Signal |
Analog RGB: 0.7 Vp-p positive at 75 ohm
H/V Separate sync, TTL Level, Positive/Negative
H/V Composite sync, TTL Level, Positive/Negative |
|
|
|
Recommend Resolution |
1024 x 768, 800 x 600, 640 x 480 |
|
|
|
Luminance Uniformity |
80% |
|
|
|
Synchronization Range |
Horizontal: 30 - 57 kHz, Vertical: 45 - 75 Hz |
|
|
|
Timing Modes |
10 preset modes + 18 user modes |
|
|
|
Auto Adjustment |
Less than 2 seconds |
|
|
|
Display Area |
304.1 x 228.1 mm |
|
|
|
Pixel Pitch |
0.297 (H) x 0.297 (V) mm |
|
|
|
Viewing Angles @ CR10:1 |
140 /120 (horizontal / vertical) |
|
|
|
Colour Depth |
16.2M colours (18 bit + FRC) |
|
|
|
Contrast Ratio |
500 : 1 |
|
|
|
Luminance |
250 cd/m2 |
|
|
|
Display Response Time (Tr + Tf) |
16 ms |
|
|
|
OSD Manual Control |
Brightness, Contrast, Pitch, Phase, Vertical Position, Horizontal Position, Language, Back Light, Menu Position, Reset, Colour Temperature (9300K / 6500K / 5000K / User / Direct) |
|
|
|
Display Plug and Play |
DDC2B, EDID1.3 |
|
Tablet & Pen |
|
Reading Technology |
Electro-magnetic resonance technology |
|
|
|
Tablet Active Area |
304.1 x 228.1 mm |
|
|
|
Tablet Resolution |
0.05 mm/point (508 lpi) |
|
|
|
Coordinate Accuracy |
± 0.5 mm |
|
|
|
Tablet Reading Height |
5 mm from cover plate |
|
|
|
Accuracy Assurance Height |
0 mm from cover plate |
|
|
|
Report Rate (Max) |
100 points/sec |
|
|
|
Maximum Pen Tilt Range |
Maximum coordination detectable pen tilt range 40 degrees from vertical |
|
|
|
Pen & Eraser Pressure Sensitivity |
512 levels |
|
|
|
Interface |
USB, Analog RGB-in, Analog RGB-out, Composite Video-in |
|
|
|
Pen (with Eraser) |
Pressure sensitive ID Pen |
|
|
|
| | |
